Ponds need Pond Liners like a building needs a foundation. Among all the materials used for Pond Liners, plastic is the most versatile. It comes in two forms- pre-formed and flexible.
Preformed or rigid plastic liners are strong and long-lasting. They are made of polythene and other recycled plastic material. They do not develop leaks. They are more cost-effective than concrete. An average gardener can set up a small pond within one day using this liner.
Some of these models are fitted above the ground and some below the ground. Rocks and stones may be placed around it to give a natural look. The liners may be both UV- as well as frost-resistant. But they may be difficult to fit because of their different shapes and sizes.
Among the preformed models, the plastic liners may be cheaper than fiberglass, but do not offer support for free-standing use of the pond in a raised water garden. It is difficult to build around a plastic pond and support it evenly. When support is not uniform there is a danger that the plastic liner will crack.
Flexible Pond Liners are also available, like PVC (Poly Vinyl Chloride) and HDPE (High Density Poly Ethylene).These liners are not as flexible as rubber. Plastic liners are often used on large holding ponds when economy is a bigger concern than flexibility.
Large ponds require a Pond Liner that is safe for fish and aquatic plant life, inexpensive, easy to install and durable. Polyethylene fits the bill. Medium-density Polyethylene contains up to 5 percent carbon black, which makes it highly UV stable and suited to outdoor life. Twenty and 30 mm polyethylene can be custom-made according to your specifications.
PVC, or Polyvinyl Chloride, has excellent chemical compatibility and puncture resistance, lending itself to membrane liner applications. Some PVC liners contain UV stabilizers which protect them from breaking down when exposed to sunlight. PVC is not a crystalline membrane liner material, so it can elongate in all directions. It is the most cost-effective buried membrane and it has the longest successful use of liner material.
Another plastic is Polypropylene. It has special properties, like outstanding dimension stability, low coefficient of expansion and contraction, wide temperature seaming range, good chemical resistance and no stress cracking.
Plastic has its plusses and minuses, and the choice depends on the individual's requirements.
Custom boxes are made from different materials. Each element determines the strength of the box and its use. Depending on the depth of one's pocket and the purpose of acquiring a certain container, one can specify what material they want their boxes to be made of. However, it would be wise to do a quick research before getting on the phone (or laptop) to order a custom container.
Custom Box Materials
Corrugated Plastic: Also known as Corriboard, corrugated plastic is a wide-range of plastic-plastic-sheet products made from high-impact polypropylene resin. Lightweight but tough, this material is mainly used for making signs and containers (read: boxes). Boxes made of corrugated plastic come in different sizes are reusable, and carry heavier weights than paperboard boxes. Corrugated plastic has many trade names, including Coroplast, Correct, and Twinplast, and it also comes in many colors.
Corrugated Fiberboard: This is the brown material most boxes are made of. Corrugated fiberboard is a type of paperboard that is made up of three layers: two flat pieces of paper with a fluted (corrugated) layer in the middle. This layering gives the material its strength, as well as the boxes.
Paperboard: Paperboard is a thick material made of, yes, paper. The main difference between cardboard and paper is that the former is thicker than the latter. Paperboard has several types, depending on their use and the industry using them, such as kraft board, laminated board, et cetera. A kind of paperboard is what is used to make corrugated fiberboard.
Cardboard: This refers to any heavy-duty paper. As such, most people use the terms cardboard, paperboard, and corrugated fiberboard interchangeably. Technically they are not the same thing. Cardboard is the parent name for all other 'boards.'
Wood: A hard material gotten from trees, wood is used to make crates and boxes and cases. It would be nice if one decided not to use wooden crates, as this would help the afforestation movement, and make steps towards reducing global warming.
Plastic: light, durable material produced by chemical processes, it can be formed into different shapes when heated. Mostly used in making crates, the plastic containers are divided into compartments that hold bottles for transportation and storage.
Metal: Metal containers are made of iron, tin, gold, or other alloys like brass. Boxes made of metal are durable, though susceptible to rust, and very expensive.
These are the different types of materials that are used to make custom containers. The strength, durability, and cost of a custom box depends on the material a customer chooses, and one's choice matters greatly if they are getting custom boxes for delivering goods to their clients.